Icom IC-F3263DT VHF IDAS Digital LMR Handheld Transceiver

---

FEATURES:

• IP67 Waterproof & Dustproof Protection

The IC-F3263D series provides rugged protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.

• Man Down and Lone Worker Functions for Emergency Call

The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatch of any potential trouble.

• 800mW (typ.) Audio Output Power

The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.

• Built-in GPS Receiver*

Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*.

• 14-pin Accessory Connector

The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speaker - microphone has a 1000mW (typ.) audio output for loud and clear communications.

• Large Full Dot-Matrix LCD

Using a large full dot-matrix LCD (32 × 18mm), the IC-F3263D series shows two lines of easy-to-read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.

• IDAS™ Features

The IC-F3263D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with NXDN™ Type-D multisite trunking. The following IDAS features are programmable.

• Built-in 2-Tone and 5-Tone*

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions. The radio stun and kill functions disable a radio over the air and the revive function restores the stunned radio.

• Built-in Voice Scrambler

The built-in inversion voice scrambler* provides secure conversation in analogue mode. When using IDAS digital mode, the digital voice scrambler provides a 15-bit key (about 32,000 codes) as standard.

• Scan Features

The IC-F3263D series can detect both analogue and IDAS conventional signals and automatically selects the transmission mode to reply to the received call.

 

Click for Brochure

SPECIFICATIONS:

General

			IC-F3263DT/DS	IC-F4263DT/DS
Frequency coverage			136–174 MHz	350–400 MHz 400–470 MHz 450–520 MHz
Number of channels			512 channels/128 zones
Channel spacing			25/12.5/6.25kHz
Type of emission			16K0F3E/8K50F3E/4K00F1E/F1D
Current drain (approx.)	Tx High (at 5W)		1.7A	1.8A
	Rx	Rated output	550mA
		Standby	160mA
Dimensions (W×H×D) (projections not included)			53.5×142.7×39.5 mm (With BP-232WP)
Weight (approx.)			400g (With BP-232WP, MB-94R & FA-SC57U)

 

Transmitter

		IC-F3263DT/DS	IC-F4263DT/DS
RF output power (at 7.5V DC)		5W, 2W, 1W (Hi, L2, L1)
Spurious emissions		78dB typ.
Frequency stability		±1.0ppm
Audio harmonic distortion		1.5% typ. (AF 1kHz 40% deviation)
FM Hum and Noise		48/43dB typ. (W/N)	46/40dB typ. (W/N)
FSK error		2.0% typ.

 

Receiver

		IC-F3263DT/DS	IC-F4263DT/DS
Sensitivity	Analogue	0.23μV typ. (at 12dB SINAD)
	Digital	0.20μV typ. (at 5% BER)
Adjacent channel selectivity		78/68/60dB typ. (W/N/D)	75/68/60dB typ. (W/N/D)
Spurious response rejection		76dB typ.
Intermodulation rejection		75/75/66dB typ. (Wide, narrow, digital)
AF output power (at 5% distortion)		800mW typ. (Internal SP, 12Ω load) 1000mW typ. (External SP, 8Ω load)

 

GPS (Depending on the Version)

		IC-F3263DT/DS	IC-F4263DT/DS
Receiver channels		12 channels
Time to first fix (cold start)		36 seconds typ. (at open sky)
Horizontal accuracy		5m (at open sky)

 

Supplied Accessories

• Battery pack, BP-232WP
• Belt clip, MB-94R
• Antenna

Share: